Same-Day Tank Water Heater Replacement

Standard and power vent tank replacements throughout the Chicago Northwest Suburbs. AO Smith, Bradford White, Rheem, Richmond. Units on truck, installed today.

📞 Call (847) 847-4978
⭐ 5.0 · 16 Google Reviews 🛡️ Licensed & Insured 📦 Units On Truck 💵 Upfront Pricing

What's Included in Every Tank Replacement

Premier Water Heaters provides complete tank water heater replacement service in Barrington and across the Chicago Northwest Suburbs. Every installation includes everything needed for safe, code-compliant operation:

  • New tank water heater — AO Smith, Bradford White, Rheem, or Richmond
  • Professional installation — licensed technicians, not subcontractors
  • Permit filing available upon request — additional fee applies; we coordinate with the city when needed
  • Gas line and water connections — new flex connectors, shut-off valves as needed
  • Venting inspection and adjustment — proper draft, no backdraft issues
  • Temperature and pressure relief valve — new T&P valve with proper discharge
  • Electrical connections — power vent motors, pilot controls, thermostats
  • Code compliance updates — expansion tank where required, T&P discharge piping, sediment trap/drip leg, proper venting
  • Full testing and commissioning — leak test, operation verification
  • Complete haul-away — old tank drained, disconnected, removed, disposed
  • Work area cleanup — swept, vacuumed, tools and materials removed
  • Owner walkthrough — operation demonstration, maintenance recommendations

No add-ons, no surprises. The quote includes everything needed to get your hot water back.

AO Smith water heater stocked on Premier Water Heaters truck

How to Know If Your Tank Needs Replacing

Tank water heaters typically last 8 to 12 years depending on water quality and maintenance. In hard water areas like Schaumburg, units often fail earlier. Here are the warning signs your tank is reaching end of life:

Age-Related Failure Signs

  • Unit is 10+ years old — even without symptoms, replacement is wise before failure
  • Rust on tank exterior — indicates internal corrosion has started
  • Rust-colored hot water — tank lining failing, replacement needed soon
  • Metallic taste or smell — anode rod exhausted, tank corrosion beginning

Performance Problems

  • Not enough hot water — sediment buildup reducing tank capacity
  • Water takes longer to heat — lower element failure or gas burner issues
  • Temperature fluctuations — thermostat failure or heating element problems
  • Strange noises — popping, crackling, or rumbling from sediment boiling

Emergency Replacement Needed

  • Water pooling around tank base — tank is leaking, replace immediately
  • No hot water at all — complete heating system failure
  • Gas smell near unit — potential gas leak, call immediately
  • Flue pipe rust or separation — dangerous venting failure

If you notice any of these warning signs, call Premier Water Heaters at (847) 847-4978 for honest diagnosis. We'll explain whether repair is possible or replacement is recommended.

Standard Tank vs Power Vent — What's the Difference?

There are two main types of tank water heaters common in the Chicago Northwest Suburbs. The type you have determines the replacement unit you need.

Standard Atmospheric Vent Tanks

Most common in homes built before 1990. These units use natural draft to vent exhaust gases up through the roof via a metal flue pipe. The exhaust goes straight up from the tank, through the ceiling, and out a roof jack.

  • How to identify: Metal flue pipe (usually 4-6 inches) going straight up
  • Installation location: Usually in basement or garage with roof access above
  • Replacement cost: $1,500 to $3,500 installed
  • Brands we stock: AO Smith, Bradford White, Rheem, Richmond
  • Typical installation time: 2 to 3 hours

Power Vent Tanks

Common in homes built 1988 to 2010, especially in Arlington Heights, Buffalo Grove, and Schaumburg. These units use an electric fan to push exhaust gases out through a side wall via PVC pipe.

  • How to identify: White or gray PVC pipe (3-4 inches) exiting through side wall
  • Installation location: Can be placed away from roof access since venting is horizontal
  • Replacement cost: $2,300 to $4,500 installed
  • Brands we stock: AO Smith, Bradford White (power vent models)
  • Typical installation time: 3 to 4 hours

If you're not sure which type you have, look at your exhaust pipe. Metal pipe going up = standard tank. PVC pipe going out the wall = power vent tank. Our technicians can confirm during the quote visit.

Tank Water Heater Brands We Install

Premium units only. We stock the best brands and let you choose based on your budget and warranty preferences.

A.O. Smith

Contractor-grade line, excellent build quality. Heavy-duty anode rods, quality thermostats. 6, 9, and 12 year warranty tiers available. Our most popular brand for replacements.

Bradford White

Made in USA, sold exclusively through supply houses. Superior insulation, reliable gas valves. Known for longevity. 6 and 10 year warranties. Premium choice for discerning homeowners.

Rheem

Good value option with solid performance. Available in most sizes, reasonable warranty coverage. 6, 8, and 10 year options. Good choice for rental properties or budget-conscious replacements.

Richmond

Entry-level option for basic replacement needs. Reliable operation, 6 year warranty standard. Good choice when cost is the primary concern and basic hot water is the goal.

Tank Water Heater Pricing

All-in pricing includes unit, labor, standard installation materials, haul-away, and disposal. Final price depends on size, brand tier, and any code-required updates.

Standard Gas & Electric Tank Replacement

30 gallon tank (1-2 people)
$1,500 – $2,200
40 gallon tank (2-3 people)
$1,700 – $2,600
50 gallon tank (3-4 people)
$1,900 – $3,000
75 gallon tank (large families)
$2,400 – $3,500
Power vent tank (any size)
$2,300 – $4,500
Range reflects brand tier (Richmond to Bradford White) and warranty length (6 to 12 years). All pricing includes installation, standard materials, haul-away, and 1-year labor warranty. Permit filing available upon request where required.

The Tank Installation Process — What to Expect

Premier Water Heaters has completed over 1,000 tank replacements in the Chicago Northwest Suburbs. Here's exactly what happens on installation day:

Before We Arrive

  • Clear access path — move items away from the water heater and the path to our truck
  • Turn off gas and water — we handle this, but helpful if you know where the shut-offs are
  • Protect belongings — we use drop cloths, but secure valuables in the work area

Installation Day Timeline

Hour 1: Disconnect old tank, drain completely, disconnect gas and water lines, remove old unit to truck. Permit filing available upon request.

Hour 2: Position new tank, connect gas line with new flex connector, connect water lines with new shut-off valves if needed, install new T&P relief valve and discharge pipe.

Hour 3: Connect venting (atmospheric) or power vent motor and PVC (power vent), fill tank and check for leaks, light pilot and adjust thermostat, test all safety systems.

Final 30 minutes: Full operation test, check for proper venting, complete cleanup, walkthrough with homeowner, review maintenance recommendations.

After Installation

Your new tank needs 30-45 minutes to heat the first full tank of water. We recommend running hot water at a few fixtures to purge any air from the lines. The tank will be at full capacity within an hour of startup.

Premier Water Heaters provides both the manufacturer warranty (6-12 years) and our own 1-year labor warranty. If anything installation-related goes wrong in the first year, we return at no charge to make it right.

Same-Day Tank Replacement Throughout the Northwest Suburbs

Premier Water Heaters provides same-day tank water heater replacement service throughout the Chicago Northwest Suburbs. Based in Barrington, we serve Arlington Heights, Palatine, Schaumburg, Buffalo Grove, Northbrook, Glenview, Wheeling, Lake Zurich, Libertyville, Vernon Hills, Hoffman Estates, Elk Grove Village, Mount Prospect, Des Plaines, Rolling Meadows, Inverness, Carpentersville, Crystal Lake, and Elgin. Units are stocked on our trucks for immediate installation. Emergency service available 24/7 at (847) 847-4978.

View All Cities We Serve →

Tank Water Heater Replacement FAQ

Common questions about tank water heater replacement in the Chicago Northwest Suburbs.

How much does a tank water heater replacement cost?

Tank water heater replacement costs $1,500 to $3,500 installed, depending on size (30-75 gallons), brand tier, and venting type. Standard atmospheric vent tanks are the least expensive. Power vent tanks cost $2,300-$4,500. All pricing includes unit, labor, standard installation materials, haul-away, and disposal. Call (847) 847-4978 for an exact quote based on your current unit and home requirements.

How long does a tank water heater installation take?

A standard atmospheric vent tank replacement takes 2 to 3 hours. Power vent tank replacement takes 3 to 4 hours due to additional electrical and venting connections. We arrive with the unit on the truck, complete the installation, test operation, and haul away your old unit in one visit.

What size tank water heater do I need?

Most homes need a 40 or 50 gallon tank. 30 gallons works for 1-2 people, 40 gallons for 2-3 people, 50 gallons for 3-4 people, and 75 gallons for large families or high-demand households with multiple bathrooms. We can recommend the right size based on your home's fixture count and usage patterns during the quote visit.

Can you install a tank water heater the same day?

Yes. Premier Water Heaters stocks AO Smith, Bradford White, and Rheem tanks in common sizes on our trucks. In most cases we can diagnose your current unit, provide an upfront quote, and complete the replacement installation the same day you call. We carry 30, 40, 50, and 75 gallon tanks in both atmospheric and power vent configurations.

What brands of tank water heaters do you install?

We install AO Smith, Bradford White, Rheem, and Richmond tank water heaters. All are premium brands with solid warranties. AO Smith and Bradford White are contractor-grade lines sold through supply houses. Rheem and Richmond offer good value at lower price points. We are brand-agnostic and recommend the right unit for your budget and warranty preferences.

How do I know if I need a standard tank or power vent tank?

Look at your exhaust pipe. Standard atmospheric tanks use a metal flue pipe that goes straight up and out the roof. Power vent tanks use white or gray PVC pipe that exits horizontally through a side wall. If you have PVC exhaust pipe, you need a power vent replacement. If you have metal flue pipe going up, you need a standard atmospheric tank. Our technicians can confirm during the quote visit.

What warranty comes with a new tank water heater?

Every tank installation includes the full manufacturer warranty — typically 6, 8, 10, or 12 years depending on the model tier you choose. AO Smith and Bradford White offer the longest warranties. Premier adds 1 year of labor warranty on top of the manufacturer coverage. If anything installation-related goes wrong in the first year, we return at no charge to make it right.

Do you haul away the old tank water heater?

Yes. Haul-away and proper disposal of your old tank is included in every installation. We disconnect the old unit, drain it completely, and remove it from your home as part of the service. No additional charge for removal and disposal. We handle everything so you don't have to worry about getting rid of the old tank.

💳 Financing Available — Acorn Finance
Monthly payments as low as $47/mo
Quick approval · No hard pull to check your rate · Multiple lenders compete
Check My Rate →

Ready for Same-Day Tank Replacement?

AO Smith, Bradford White, Rheem units stocked on truck. Licensed installation, upfront pricing.

📞 Call (847) 847-4978

Same-day installation · 1,000+ completed · Licensed & Insured

📞 CALL (847) 847-4978